diff --git a/1-10.svg b/1-10.svg new file mode 100644 index 0000000..dc1f7b3 --- /dev/null +++ b/1-10.svg @@ -0,0 +1,362 @@ + + + +mortice forcross braceand lockingblockmortice forvice lower link(front right legonly)mortice forlongitudinalbrace and locking wedgehole for vice screw (front right leg only)section through legsend elevation, right hand sideRoubo bench, 1/10 scalefront elevation diff --git a/README.md b/README.md index 66a11e4..9d09640 100644 --- a/README.md +++ b/README.md @@ -71,6 +71,10 @@ The following parameters may be passed to the `bench` module: intersects an apparently solid piece, assume there is a mortice! 5. screw threads are not yet modelled. +## SVG files + +The SVG files in this repository are hand drawn rather than being auto-generated off the model, since I don't (yet) know how to auto-generate elevations from an OpenSCAD model. They should be treated as somewhat schematic, since all the dimensions are a bit variable. + ## Licence [Creative Commons Attribution/Non-commercial/Share Alike](https://creativecommons.org/licenses/by-nc-sa/4.0/deed.en) diff --git a/leg_top_detail.svg b/leg_top_detail.svg new file mode 100644 index 0000000..de1f966 --- /dev/null +++ b/leg_top_detail.svg @@ -0,0 +1,224 @@ + + + + + + + + + + + + + + + + + + + + + Roubo bench, leg top detail, full sizeleft side elevation + + + leg section (100mm) + + + + + Roubo bench, leg top detail, full sizefront elevation + + + leg section (100mm) + + + + topthickness(75mm) + + +